Cart is empty
Save 21%
DESCRIPTION of a Power Pass 6 Way TV Splitters
- Inputs: 1
- Outputs: 6
- Connections: F type
- Range: 5-2300MHz
- Bands: FM / UHF / VHF / Satellite
- Power passing: 1 leg
- Model #: proSPL612P
- Loss: 12dB
- See Users Technical Installation manual on splitters
- CC 8529108090 18g Y
USES of a Power Pass 6 Way TV Splitters
- To split a TV signal to several rooms
- For use in conjunction a power unit and a masthead amplifier
- Split TV analogue signal to give independent viewing in several rooms
- Split output from a sky box to allow sky picture to viewed in more than one room (will only support a sky eye on 1 leg - the power passing one)
ADVANTAGES of a Power Pass 6 Way TV Splitters
- Very effective means of splitting signal with a low level of signal loss
- Can be use with masthead amplifier as it allows power to pass through
- Very inexpensive compared to a Distribution Amplifier
- Does not need power supply
- They are compact and have robust metal housing
- They are relatively easy to install
- In a good reception area they can feed the signal to at least 4 and up to 8 TVs without a significant signal loss
DISADVANTAGES of a Power Pass 6 Way TV Splitters
- They are more expensive than unpowered splitters
- By definition splitters always lead to a certain level of signal loss while a Distribution Amplifier would actually boost the signal
- Only supports the use of Sky eyes on the power passing leg
Summary: An F-type splitter is used to allow signal from an aerial to run to several rooms to allow independent viewing.
They come in a range of sizes 2, 3, 4, 6 and 8 way.
There are 2 basic types:
- Passive splitters: Are used to distribute un-amplified (or post amplified) signal to several rooms.
- Power passing splitters: Can be used between a power unit and the Masthead amplifier/Aerial.
- They allow the 12 volt signal from the power unit to pass through to the Masthead amplifier
- while also distributing the amplified signal on the other ports.
Equipment needed
- Snips
- Splitters
- F type twist on connectors
Procedure to install a TV Splitter (Power Passing)
- Cut the input cable coming from the Masthead Amplifier
- so that it is long enough to reach where all the cables coming from the various rooms terminate at a single point
- Put an F connector on the aerial cable and also on all cables feeding the various TV points which are to be connected
- Connect the aerial cable to the "IN" port on the splitter
- Connect the cable coming from the Power Unit to the "OUT" port that is marked "POWER PASS"
- Connect the TV point cables to the "OUT" ports on the splitter
Main Points to remember
- Splitters are used as a simple, effective and low cost alternatives to distribution systems
- work well when the initial signal strength is good.
- Passive splitters do the same job at a lower cost than power passing splitters for a standard unpowered system
- P pass splitters are designed for use with power units and masthead amps but can work as passive splitters
- Never use splitters in series (looped one after the other) as this will lead to high levels of signal loss
- Always use F-type splitters as IEC (Coax) splitters normally have high levels of signal loss
No posts found
We aim to provide a fast, reliable & low cost delivery service
All orders we ship, leave our warehouse on time
- Standard Courier With Fastway (2-4 Working Days)
- Cost is €3.95 on Orders Below €100
- Free Delivery on Orders Above €100
- Express Courier (1-2 Working Days)
- With Fastway: Cost is €6.50 (or €2.50 extra if you qualify for free standard shipping)
- With DPD: Cost is €7 (or €3 extra if you qualify for free standard shipping)
- This service guarantees that any order placed before 4.30pm with Fastway or 3pm With DPD (Mon - Fri) will ship from our depot that same day on the express delivery service*
- *Orders placed after 4.30pm with Fastway or 3pm with DPD on Fridays & during weekends / bank holidays will be shipped the next working day
- An Post
- Cost is €2.50 (P & P)
- Available only on selected products with the An Post logo
- Small Parcels
- Cost is €3.50
- Available only on products with the small parcels logo**
- Great Britain
- Cost is €7.50
- Western Europe
- Cost is €10
- Belgium, France, Germany, Holland, Italy, Lithuania, Luxembourg, Spain, Portugal etc..
- Rest of Europe
- Cost is €20
- Croatia, Czech Republic, Estonia, Iceland, Malta, Slovenia, Switzerland, Norway, Sweden, Finland etc..
- Rest of World
- Cost is €30
- Please contact us before purchasing to confirm
Terms
- All shipping fee prices listed are ex-VAT @ 23%
- Irish shipping rates apply to the whole Island (North & South)
- Shipping fee is fixed for an order, regardless of the number of items bought
- All courier orders require signed proof of delivery and the customer must be contactable by phone
- We do not offer a weekend delivery service (Mon-Fri only excluding bank holidays)
- *Our courier achieves a 98% success rate on express deliveries
- ** Applies to island of Ireland only (North & South)
- Heavy or Large Parcels (Applies only to Non Irish or UK customers): It may be necessary to charge higher shipping fees / offer option to cancel order
