50m Outdoor Cat5e UTP Ethernet Cable Roll

Below is documented the correct wiring format for a CAT5 Cable and detailed instruction for making a CAT5 Cable.

WIRING DIAGRAMS FOR A CAT5 CABLE

Notes

The diagram above is called a CAT5 Type B wiring method which is the one that is almost exclusively used in industry.

TO MAKE A CAT5 CABLE

Equipment needed

• Roll of CAT5 Cable
• RJ45 CRIMPING Tool
• RJ45 Connectors * 2

Steps

1. Using a crimping tool remove the outer protective sleeve leaving around 25mm of cable exposed
2. Next untwist each of the pairs of cables
3. Line up the wires in accordance with the wiring diagram above
4. Again using the crimping tool cut the cable leaving about 12-15mm of cable exposed.
5. Push the cables into the RJ45 Plug
6. Use the crimping tool to crimp the RJ45 Connector on the the cable
7. Cut the CAT5 cable to the required lenght
8. Repeat the process to put a connector on the far end

NOTES ON CAT5 WIRING

1. 568-A wring

There is an alternate wiring convention for CAT5 cables called 568-A. See diagram below:

The most common use of this convention would be use a Type A & and a Type B connector to make a cross over cable.

2. Types of CAT5 Cable

• The most commonly used cat5 cable is UTP (Unshielded Twisted Pair) cable. This is suitable for homes and offices
• A more expensive option is to use FTP (Foil shielded Twisted Pair) cable
• Which gives greater interference protection when running next to power cables

Notes on Connectors

• The RJ stands for "Registered Jack"
• The RJ11 comes with 4 pin slots
  • Only the 2 middle pins are needed
  • It is used for dial up internet or voice but not broadband
  • It is used with telephone cables
  • If the RJ connector has copper pins in all 4 slots it is actually an RJ14 but can be used as if it was an RJ11
• The other commonly used RJ plug is the RJ45
  • It is used with LAN networks, ethernet ports etc
  • It has 8 pins
  • It is used with CAT5 Cable

We aim to provide a fast, reliable & low cost delivery service

All orders we ship, leave our warehouse on time

• Standard Courier With Fastway (2-4 Working Days)
  • Cost is €3.95 on Orders Below €100
  • Free Delivery on Orders Above €100
• Express Courier (1-2 Working Days)
  • With Fastway: Cost is €6.50 (or €2.50 extra if you qualify for free standard shipping)
  • With DPD: Cost is €7 (or €3 extra if you qualify for free standard shipping)
  • This service guarantees that any order placed before 4.30pm with Fastway or 3pm With DPD (Mon - Fri) will ship from our depot that same day on the express delivery service*
  • *Orders placed after 4.30pm with Fastway or 3pm with DPD on Fridays & during weekends / bank holidays will be shipped the next working day
• An Post
  • Cost is €2.50 (P & P)
  • Available only on selected products with the An Post logo
• Small Parcels
  • Cost is €3.50
  • Available only on products with the small parcels logo**
• Great Britain
  
  • Cost is €7.50
• Western Europe
  
  • Cost is €10
  • Belgium, France, Germany, Holland, Italy, Lithuania, Luxembourg, Spain, Portugal etc..
• Rest of Europe
  
  • Cost is €20
  • Croatia, Czech Republic, Estonia, Iceland, Malta, Slovenia, Switzerland, Norway, Sweden, Finland etc..
• Rest of World
  
  • Cost is €30
  • Please contact us before purchasing to confirm

Terms

• All shipping fee prices listed are ex-VAT @ 23%
• Irish shipping rates apply to the whole Island (North & South)
• Shipping fee is fixed for an order, regardless of the number of items bought
• All courier orders require signed proof of delivery and the customer must be contactable by phone
• We do not offer a weekend delivery service (Mon-Fri only excluding bank holidays)
• *Our courier achieves a 98% success rate on express deliveries
• ** Applies to island of Ireland only (North & South)
• Heavy or Large Parcels (Applies only to Non Irish or UK customers): It may be necessary to charge higher shipping fees / offer option to cancel order