Cart is empty
Mount a TV Aerial - Chimney Bracket, Lashing Kit & Pole
Tools needed
- A ladder
- Roof ladder
- Ratchet & 15mm long neck socket
- Snips
- Vice grips
- Safety equipment (harness, safety mat etc)
Equipment needed
- Chimney bracket (9 inch or 13 inch) with lashing kit
- Pole (1.8m long, 32mm diameter - steel or aluminium)
Location
- On a chimney
Steps to Install
- Position the roof ladder adjacent to the chimney and secure the ladder and put on all safety equipment
- Ascend the ladder with the tools and equipment
- Open the lashing kit bag and wrap the end of the wire coil 4 times around the loop on the 'J'-bolt
- Slot the threaded end of the 'J'-bolt into the hole in the chimney cradle
- Wrap the wire coil around the chimney, keeping as straight as possible
- Wrap the wire coil 4 times around the loop on the other 'J'-bolt
- Making sure it is just long enough to slot into the other side of the chimney bracket
- Cut off excess wire coil
- Put angle brackets under the wire coil at the other 3 corners of the chimney
- Use the 15mm socket to tighten the nuts on the 'J'-bolts while using the vice grips to clamp the 'J'-bolt
- Insert the U-bolts into the bracket and loosely tighten
- THE CHIMNEY BRACKET INSTALLATION IS NOW COMPLETE
